Greenhouse UseElectric Film RollerAttention Should Be Paid To The Following Matters To Ensure The Safe Operation And Control Effect Of The Equipment:
Installation And Commissioning Specifications
1. Before Installation, Confirm That The Equipment Matches The Specifications Of The Greenhouse, And Select A Suitable Power Film Roller Based On The Type And Length Of The Film To Avoid Exceeding The Load Limit.
2. When Fixing The Film Roller, Ensure That The Load-bearing Capacity Of The Greenhouse Frame Meets The Standard, And The Machine Body Is Horizontally Aligned With The Film Roller Axis To Prevent The Film From Deviating And Tearing During Operation.
3. The Circuit Connection Needs To Be Matched With The Rated Voltage (220V Or 380V), Equipped With Leakage And Overload Protection Devices, And Protected By Wire Conduit To Avoid Damage.
Daily Operation Points
1. Before Starting, Check Whether The Edge Of The Film Is Stuck And Whether The Connecting Parts Are Loose. In Winter, Manually Assist In Rotation To Prevent The Motor From Jamming.
2. During Operation, Monitor The Status Of The Equipment And Immediately Stop The Machine If Any Abnormal Noise, Vibration, Or Skewed Film Is Found. Check For Gear Jamming Or Film Entanglement Issues.
3. When Switching Between Manual/automatic Modes, It Is Necessary To Stop Running Before Operating To Avoid Circuit Conflicts; Ensure Stable Network Signal During Remote Control.
Maintenance And Protection
1. Clean The Surface Dust And Film Debris Every Week, And Add Lubricating Oil To Transmission Components Such As Gears And Bearings Every Month To Maintain Smooth Operation.
2. Check The Waterproof Sealing Ring Before The Rainy Season, Clean The Drainage Holes, And Prevent Rainwater From Seeping Into The Motor; Strengthen Ventilation And Heat Dissipation During High Temperature Seasons.
3. Before Long-term Use, Fully Unfold The Film, Cut Off The Power And Cover It With A Dust Cover, And Store It In A Dry Place To Prevent Component Corrosion.
Safety Management
1. Regularly Check The Sensitivity Of The Travel Switch To Prevent Membrane Breakage Or Motor Damage Caused By Overtravel Operation.
2. Operators Need To Be Familiar With Emergency Shutdown Procedures, And Children And Non Professionals Are Prohibited From Touching The Equipment.
3. Adjust The Film Rolling Speed According To The Growth Stage Of Crops To Avoid Stress Reactions Caused By Severe Ventilation.
